I am copying from 340Swinger.orgChrysler used two shades of this highly textured Argent paint-light and medium-and they were the only manufacturer that used them at all. The Light Textured Argent, part number DX 8555, is obsolete. The Medium Textured Argent, part number DNA 8933, can sometimes be found at larger, older Ditzler dealers. Last used in the mid 1970's, it is now all but obsolete. Older Ditzler dealers that have remaining stock can mix this paint for you, but it can also be mixed from currently available paints. Here's how.
LIGHT ARGENT TEXTURED Ingredients for 1 pint (double for quart) 1/2 ounce DX 204- Radiance Silver 1/2 ounce DDL 8568- Non Smudge Aluminum/aluminum base 3 1/2 ounces DCA 468 High Performance ClearAdd 4 ounces of top grade lacquer thinner with drying time according to temperature. Mix thoroughly and pour in 1 pint touch up gun. Use 10 clean 1/4" ball bearings in paint cup to keep the paint mixed. Use three light coats over an existing finish or four to six coats over unfinished parts. This paint runs VERY easily, allow 5-10 minutes between coats.
MEDIUM ARGENT TEXTUREDThe steps are exactly as above, but add black lacquer to darken. Start with six drops per pint and stir thoroughly, then spray a sample to compare to the original finish. Add a drop at a time until you achieve the correct tint.
Spray these paints at 55-60 lbs. keeping the gun 18-30 inches from the surface. Frequently agitate the mixture to maintain uniform consistency because the Radiance Silver is heavy and will settle out quickly.
Rallye wheel silver (argent silver, non textured) 3960 Organosol black (textured black used on hoods, tail panels etc.) ddl9355mixing formulas I have found 2 different formula's The second seems to have a lot more texture to it and Im not so sure it should be so rough.
Strong black DMA358 794.5 or 804 Coarse Poly DMA349 24.4 or 24 Texture DMA364 171.1 or 972 Underside gray primer (bottom of the car) 2 parts DP50 (gray) and 1 part DP90 (black) epoxy primer 2:1 mix. F6 Green Qt Formula PPG DBC Basecoat tint---------cumulative parts DMD662 -----------89.8 DMD647 -----------98.8 DX685------------129.1 DMD686 ----------222.6 DMD690 ----------368.7 DMD640 ----------691.0 DBX689 ---------1016.5 turquoise 4799D but delete the metal flake dupont or PPG 13195 red 273 high performance -- 5092D dupont or PPG 2136 street hemi5067D dupont or PPG 2186 or PPG 3116 Universal, Chrysler motor Mandarin orange
race hemi ('64 - '65) and Max Wedge -- 5065DH dupont or PPG 2201 Gary H. wrote:
One e-mail from a ex-member here relayed that RM, Ditzler or Acme Jobber Paint Codes for Mopar Engine: red -- like on 273 high performance -- is 5092D.Thanks,Gary H.-----Original Message-----Some years back (5 or 6), the list had a discussion on engine paint for the Big Blocks and Small Blocks and which brand and part number were the best match.I lost the saved e-mails was wondering if anyone remembered what brand/color# was the best match to the original Dodge engine paint.If dont remember, what paint would you use on a 65 Small Block? --Tom---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.