Re: Intake manifold
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Intake manifold




3/8"

William Harrison wrote:
While we are on this subject; Just how much taller is an RB block compared to a Low Deck?

Bill Harrison 65 Coronet 2 dr post

--- On Wed, 2/3/10, Stevan Miner <miner@xxxxxxxxxxx> wrote:

From: Stevan Miner <miner@xxxxxxxxxxx>
Subject: Re: Intake manifold
To: 1962to1965mopars@xxxxxxxxxx
Date: Wednesday, February 3, 2010, 7:08 PM

Hi Dave,
The intake manifold for a 383 or 400 will fit your 361 just
fine as they are all considered LB engines. One from a 413,
426W or a 440 will not fit. They are RB engines.
Stevan Miner
Miner Auto Service
Winnebago, MN

--------------------------------------------------
From: "Dave Isle" <mnwildpunk@xxxxxxxxx>
Sent: Wednesday, February 03, 2010 9:59 AM
To: "62-65 mopars 62to65mopars" <1962to1965mopars@xxxxxxxxxx>
Subject: Intake manifold

Hey everybody I've been online looking for a 361 4BBL
Intake manifold I have found a lot of them for later 383 but
I don't know if they will work for my chrysler most of them
look like they have a slightly different look
Sent via BlackBerry by AT&T


----
Please address private mail -- mail of interest to
only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well
as other personal messages only to the intended recipient,
not to the Clubhouse public address. This practice will
protect your privacy, reduce the total volume of mail and
fine tune the content signal to Mopar topic.  Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
----
Please address private mail -- mail of interest to only one
person -- directly to that person.  I.e., send
parts/car transactions and negotiations as well as other
personal messages only to the intended recipient, not to the
Clubhouse public address. This practice will protect your
privacy, reduce the total volume of mail and fine tune the
content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.






----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.











Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.