Re: Roll-up window regulator clips

[Scott Rousseau <srandsr@xxxxxxxxxxxxx>]

Yes, the round-shaped fasteners that keep the regulator arm from coming off the post.

Scott
Dodge 330 wagon
Dodge 330 2-door post

--- On Sun, 1/10/10, Joey <jake4@xxxxxxxxxx> wrote:

> From: Joey <jake4@xxxxxxxxxx>
> Subject: Re: Roll-up window regulator clips
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Sunday, January 10, 2010, 10:30 AM
> 
> Are you looking for the round shaped fasteners?
> Joey
> ----- Original Message ----- From: "Scott Rousseau" <srandsr@xxxxxxxxxxxxx>
> To: "Mopar Website" <1962to1965mopars@xxxxxxxxxx>
> Sent: Sunday, January 10, 2010 1:26 PM
> Subject: Roll-up window regulator clips
> 
> 
> > 
> > I don't know if this actually posted the first time,
> so I am posting it again.
> > 
> > I had a window regulator clip pop off the window
> regulator arm in the driver's side door of my wagon, and it
> appears to be lost forever. Does anyone know where I can get
> a replacement?
> > I looked at what R/T Specialites sells, but it's a
> X-shaped piece whereas mine had sort of a capsule-shaped
> hole with two clips holding it onto the post. If that's the
> way they are making them now, then fine. I'd just like to be
> able to roll my window up and down again!
> > 
> > Thanks,
> > Scott
> > 
> > Dodge 330 wagon
> > Dodge 330 2-door post
> > 
> > 
> > ----
> > Please address private mail -- mail of interest to
> only one person --  directly to that person. 
> I.e., send parts/car transactions and negotiations as well
> as other personal messages only to the intended recipient,
> not to the Clubhouse public address. This practice will
> protect your privacy, reduce the total volume of mail and
> fine tune the content signal to Mopar topic.  Thanks!
> > 
> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> > 
> > 
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
> 
> 
>