Re: rocker arms
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: rocker arms




hi,

depending on spring pressures and if you will be running this on the street you should seriously consider stainless steel roller rockers,

unless you need a new hobby of regular changing  of broken rockers.

been there, did that,  didnt like that hobby.


On Dec 12, 2009, at 1:59 AM, MO ( Steve Mick) wrote:


I am going to use 440 heads with stock valve covers.. Can someone tell me if I will have V cover interference with a .500+ lift cam and roller tip or aluminum rockers? (1.5 ratio )...........Thanks for any input..................................MO



Derrick Brown
'63 Sport Fury, 4 speed, 426mw
derrickb@xxxxxxx


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.














Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.