Re: stroker pistons
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: stroker pistons



Gary
Thank you for the link.
I can now finish pricing the build using separate parts or buying a complete setup from 440 source.

Later
Bill
BTW this build will go either into a Lebaron or Stratus.

--- On Mon, 11/16/09, Gary H. <spigot2039@xxxxxxxxxxx> wrote:

> From: Gary H. <spigot2039@xxxxxxxxxxx>
> Subject: Re: stroker pistons
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Monday, November 16, 2009, 10:56 PM
> 
> These? 
> 
> http://www.campbellenterprises.com/parts.php?type=search&query=ros99894
> 
> Thanks,
> Gary H.
> 
> -----Original Message-----
> >From: William Harrison  
> >
> >I have checked their web site and found different
> stroker kits that would work but I have a good 440 crank and
> have a line on some scat 440 I beam rods cheap so if I can
> find the right pistons I can build the stroker for less than
> half of what 440 source wants.
> >Later
> >Bill 
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
>



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.