RE: Small holes in floor and trunk

[Steven Charette <stevec@xxxxxxxxxxxxxxxxxxxx>]

Too cool - here is a list RustBuster locations:
http://www.rustbusters.com/locations.html

-----Original Message-----
From: Tom Watters [mailto:tomwatters@xxxxxxxxxxx] 
Sent: Wednesday, November 11, 2009 12:05 AM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: Small holes in floor and trunk

Here's a Youtube link I found of it and results.

http://www.youtube.com/watch?v=uV-QPTpJaYo

Tom Watters wrote:
> MO,
>
> You could find a local specialist who can spray molten zinc to fill 
> the holes and coat the metal, then sand/work it to be of form.  My 
> friend in Colorado had the pin-holes on wheel lips on his 65 dart 
> filled this way.  He was very happy with the work.
>
> --Tom
>
> Christopher Glick wrote:
>> 2 part appoxy like JB weld or
>> Christopher Glick
>>
>>
>> ----- Original Message -----
>> From: MO ( Steve Mick) <micher@xxxxxxxxxxxxxxx>
>> To: 1962to1965mopars@xxxxxxxxxx
>> Sent: Wed, 11 Nov 2009 01:56:01 +0000 (UTC)
>> Subject: Small holes in floor and trunk
>>
>>
>>  My Dodge has several holes  ( 1/8" and under)  im the floor and the 
>> trunk floor.. The surrounding metal is probably rather thin, but not 
>> bad enough to weld in patches.  In the past, I have coated these 
>> areas  with fiberglass woven cloth and resin. But since fiberglass 
>> and metal expands and contracts at different rates, the patches 
>> sometimes loosen up.. Anyone have a different way to seal up these 
>> holes and strengthen the thin areas without welding?  Thanks for any 
>> input....................MO
>>
>> ----
>> Please address private mail -- mail of interest to only one person -- 
>> directly to that person.  I.e., send parts/car transactions and 
>> negotiations as well as other personal messages only to the intended 
>> recipient, not to the Clubhouse public address. This practice will 
>> protect your privacy, reduce the total volume of mail and fine tune 
>> the content signal to Mopar topic.  Thanks!
>>
>> '62 to '65 Mopar Clubhouse Discussion Guidelines:
>> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>>
>> ----
>> Please address private mail -- mail of interest to only one person -- 
>> directly to that person.  I.e., send parts/car transactions and 
>> negotiations as well as other personal messages only to the intended 
>> recipient, not to the Clubhouse public address. This practice will 
>> protect your privacy, reduce the total volume of mail and fine tune 
>> the content signal to Mopar topic.  Thanks!
>>
>> '62 to '65 Mopar Clubhouse Discussion Guidelines:
>> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>>
>>
>>
>>   
>


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.