RE: Small holes in floor and trunk

[Steven Charette <stevec@xxxxxxxxxxxxxxxxxxxx>]

MO,
	I'm with Christopher - I hosed the rusted areas (floor and bottom of
rocker panel) down with Extend (a spray-on rust converter) and put a thin
layer of resin just to firm things up.  It won't get any worse and looks
okay for now.  Worked well on small (6-8" square) areas.

SC

-----Original Message-----
From: Christopher Glick [mailto:MrChristopher1@xxxxxxxxxxx] 
Sent: Tuesday, November 10, 2009 9:34 PM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: Small holes in floor and trunk


2 part appoxy like JB weld or 

Christopher Glick


----- Original Message -----
From: MO ( Steve Mick) <micher@xxxxxxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Wed, 11 Nov 2009 01:56:01 +0000 (UTC)
Subject: Small holes in floor and trunk


 My Dodge has several holes  ( 1/8" and under)  im the floor and the trunk
floor.. The surrounding metal is probably rather thin, but not bad enough to
weld in patches.  In the past, I have coated these  areas  with fiberglass
woven cloth and resin. But since fiberglass and metal expands and contracts
at different rates, the patches sometimes loosen up.. Anyone have a
different way to seal up these holes and strengthen the thin areas without
welding?  Thanks for any input....................MO 


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.