Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies I coated the new poly with a bunch of degreaser and power washed it out in the rain. It worked pretty well. Then I started taking a few things off. The intake, dist,t-stat housing and valve covers. It's really gunked up bad but I did notice that it probably had the pass side head replaced. It's from a '65 Plymouth (jump in if I'm wrong Dodger) and has the 2 bolt VC,s but the right head is the older style with the third bolt hole altho it wasn't used. Now I'd think the factory just had one laying around but it's much cleaner than the otherside so that makes me think it had been replaced. It's still froze up but I'm working on freeing it. I also took out the pushrods but the lifters are kinda stuck. I have them soaking too. I just finished up my garage project too and it's much handier. It's nice to have a new toy to beat on :-) ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.