Leaking water from exhaust bolt

[Scott Mirabella <jmirab2972@xxxxxxxxxxx>]

Hi All,
Took the Fury out for a spin tonight. Ran rough when I started it, but 
it's been a while. Got it warmed up and drove around . As it got hotter 
I noticed the idle "sticking" high. I could kick it down, but it stuck 
again when I drove. Got home and heard a hissing sound. Opened the hood 
and found water dripping from the front drivers side exhaust bolt. Could 
see where it leaked onto the oil filter housing and k member. Radiator 
is almost full so it shouldn't have gotten to hot. Anyone see this 
before? I know the exhaust bolts rum through water passages. Cracked 
bolt? Cracked head? Other? Thanks in advance.

Scott Mirabella
1964 Fury convertible
383 4speed


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.