Hey Kevin, my 64 Polara came with a Poly, but I put a warmed up 426 wedge and 4-spd in it without changing any fuel lines and I've never noticed it running out of fuel... of course my wife says I don't notice anything anyway, so maybe you better not go by me! Rich Kinsley wrote: > > Kevin, my car is a poly of course but I bet I use much more gas than > your 383 will with a single 4bbl. Mine was fine with the 5/16" but when > I had to change out the line I figured I'd just do the 3/8" . I have the > > big Holley Blue electric pump which I am using with a 5/16" pick-up in > the tank. I can change that later if needed but it's doing fine as is > too. So I gotta think you'll be okay as long as you don't put a blower > with a pair of 750's on it :-) > > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies > ===================================================================== > Kevin Merkley wrote: > > > > Hi, > > > > I'm putting in a 383 4V in my wife's 64 Polara 500 ragtop and wonder if > > the 5/16" pick up for the poly will suffice? What is the cut off for > > 3/8" pick up and line? > > > > I will also have to change the fuel line regardless of the size. > > > > Thanks for your advice. > > > > K. > > > > Kevin R. Merkley > > Thunder Bay, Ontario > > 64 Dodge 440 2dr HT (Cdn) > > 64 Dodge Polara 500 Convertible (Cdn) > > > > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies Jeff Adams 64 Polara ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.