RE: '68 Leafs vs '64 Leafs

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

I tried and pried on a set of '68 Roadrunner leafs and could not get 
them to work as is. I think they may work with some different brackets 
BUT is it worth the effort. I just had my originals redone and added a 
leaf. They work good. BTW I still have the RR springs if anyone wants 
them. Dodger? A freebie?
Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies

=====================================================================
Dave64 wrote:
> 
> Does anyone happen to know if a set of leaf springs from a '68 GTX will 
> fit on my '64 Belvedere?  I'm going to look at a complete rearend I 
> found that I'm probably going to buy to swap in from the '68, and I 
> wondered about the springs too.  So far I've heard one opinion of "I 
> don't think so", but I'm figuring someone on here probably knows for 
> sure.  My crude measurements of my springs tell me they're right about 
> 54" from spring eye to spring eye straight across.  But I'm thinking 
> there's more to it than that.
> 
> Thanks in advance.
> 
> Dave
> '64 Belvedere
> 
> 
>       



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.