RE: Oil breather finish?

[Steven Charette <stevec@xxxxxxxxxxxxxxxxxxxx>]

Geez... I always thought it was the last three digits of the part number...

SC 

-----Original Message-----
From: Jim Altemose [mailto:jaltemoose@xxxxxxxxx] 
Sent: Monday, September 28, 2009 2:34 PM
To: 1962to1965mopars
Subject: Oil breather finish?


What kind of finish is the valve cover oil breather supposed to have on a 63
Polara 500 with a 383?  I can't tell if it's silver or was painted black at
one time.  It feels like aluminum, but it seems to be rusting a bit and
there's areas on it that look like black paint but it could just be dirt.
Any advice on finishing it so it looks good?
It says Oil on it; reminds me of that old blonde joke about missing the
"710" cap.

As always, thanks.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.