RE: Reuse B/RB intake Gasket?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Reuse B/RB intake Gasket?



I have 2, maybe 3 new intake pans for free, just pay postage.

one or two of them have the heat passage open.

The other one was advertised by Jegs as having the heat passage closed 
however it is open in the pan and they sent gaskets with it blocked.  
This one is really a mess, it comes flat and it must be bent into shape 
- I didn't even try to use it.

I am in Arizona, it is too hot here to have the heat passage open, I 
have the flapper cut out of my heat riser and I have an aluminum 
manifold.  

I only have one shipping box, if you can use them let me know, I'll send 
them and you can send me postage when they arrive.  You may have friends 
you want to share with.

Dennis C.


Don Gallimore wrote:
> 
> I'm wondering if one can reuse the aluminum intake manifold for these 
> engines?  It was installed last year in the spring and probably has one 
> trip to Carlisle on it (600 miles) and not much more.
> 
>  Akron Don



1996 Dodge Ram 3500 Van Conversion
1964 Plymouth Belvedere 318 Auto
1963 Plymouth Sport Fury 383 4-speed
1949 Dodge Pickup 289/C4 soon to be changed
1998 Honda Valkyrie Standard


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.