No problem, thanks for sharing the cam tech info! I'll probably add https://www.lunatipower.com/Tech/Default.aspx to the tech page. Gary H. -----Original Message----- > >i sent it too dennis there is alot of tech info there for all too see sorry too screw up > >--- On Sat, 8/22/09, Gary H. wrote: > >> From: Gary H. < >> >> It's a HTML message, not plain text = geek speak. >> >> Here's the links to the cam info. Is that what you were >> sharing? >> >> I also added a link to a lot of cam tech information. >> >> Chrysler 273 - 360 (1967 - Present) >> https://www.lunatipower.com/Category.aspx?id=61 >> >> >> Chrysler 361 - 440 (1958 - Present) >> https://www.lunatipower.com/Category.aspx?id=62 >> >> >> Chrysler 426 Hemi (1964 - 1971) >> https://www.lunatipower.com/ProductGroup.aspx?id=249&cid=63 >> >> General Cam Tech Information >> https://www.lunatipower.com/Tech/Default.aspx >> >> Thanks, >> Gary H. ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. This email was sent to: arc.6265@xxxxxxxxxxxxxx u/?bUrDWg.bSONJP.YXJjLjYy ?p=TEXFOOTER