RE: A833 bearing retainers

[Jeff Adams <ledman_70@xxxxxxxxxxx>]

Thanks guys for the input on this topic. I can see this project is not 
gonna be a simple one, either. Oh well, why would they start being easy 
now, right??
Steve Mick wrote:
> 
> Jeff, I'm thinking your bell housing you have now is hard to find. I 
> don't 
> think I would alter it any. Maybe on E-pay you could find the bell with 
> the 
> right size retainer hole from a big block pickup 
> truck?......................MO
> ----- Original Message ----- 
> From: "Jeff Adams" <ledman_70@xxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Friday, August 21, 2009 4:41 PM
> Subject: A833 bearing retainers
> 
> 
> >
> > Hey guys, I'm gettng ready to put an 833 OD into my 64 Polara to replace
> > the 833 already in there, which I think has the 4.3" retainer. What I'd
> > like to know is if the bolt circle on the OD trans bearing retainer,
> > which I think is 5.25", is the same as the bc on the 4.3" retainer. If
> > not, how hard would it be to drill/tap the front of the OD trans to fit
> > the 4.3" retainer? If I can't do that, then I'll have to have the bell
> > housing machined to fit the big br, and that would keep me from being
> > able to go back to the small br if I blow up the OD trans. Confused
> > now?? I am!
> >
> >
> > Jeff Adams
> > 64 Polara
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person --  
> > directly to that person.  I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will 
> > protect 
> > your privacy, reduce the total volume of mail and fine tune the content 
> > signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> > 
> 



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.