Rockers for 383
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Rockers for 383



Had a rocker fail in my original 1964 engine and would like to replace 
all while I am at it.  Summit has some either aluminum or steel.  Some 
have a 1.5 ratio and some have 1.6 ratio.  Not sure what the difference 
is and if either would work.  Is there any other source for these?  
Thanks in advance for any help.

Dave


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.