Re: new 318 engine parts wanted

["Gary H." <spigot2039@xxxxxxxxxxx>]

There are 2 vendor's listed on http://www.1962to1965mopar.ornocar.com/poly318.html that can probably help:  1) Our own Gary Pavlovich and 2) Ram Racing Engines, now part of Mopar Mecca, which has a Poly Engines section 

Ray Bell I think is still a member here. He lives in Australia and may have some tips.
http://www.1962to1965mopar.ornocar.com/mmo42008.html has his e-mail -- also:
http://www.1962to1965mopar.ornocar.org/mmo52005.html 

Let us know what you end up with.

Thanks,
Gary H. 

-----Original Message-----
 
>Hello all
>
>I am in the process of having my 63 Dodge 318 Poly engine machined in the next few days, and then I will be able to have a list of sizes of parts i need to order.
>
>What I am after is some advice on where I can buy a rebuild kit, that includes Pistons, rings, all bearings, oil pump, timing chain, full gasket set ect.
>
>I would also like to fit a new cam and lifters in to, maybe with a bit more "sportier" than a stock cam.
>
>Any info on where I can find all these parts much appreciated.
>
>I also live in Australia, so the Company you suggest must be willing to post these parts to me.
 
>Thanks
>Jim 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.