RE: dash mounted rearview mirror
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: dash mounted rearview mirror



I took a look at the basin wrenches.. the one to get around a 1-3/8 nut 
are pretty damn big.. I found a medum size adjustable pip wrench (up to 
2") I'll sees if I can't get that sucker in there...

Thanks guys
Doug Daniel wrote:
> 
> it is called a basin wrench   not that i am a plumber !!!  but that is 
> what=
>  it is called=20
> 
> --- On Sat, 8/8/09, Tom Duross <tduross1@xxxxxxxxxxx> wrote:
> 
> > From: Tom Duross <tduross1@xxxxxxxxxxx>
> > Subject: RE: dash mounted rearview mirror
> > To: 1962to1965mopars@xxxxxxxxxx
> > Date: Saturday, August 8, 2009, 7:42 PM
> >=20
> > No luck with a socket and universal joint? I realize it's a
> > biggie.
> > If you can get fairly vertical to it you could try a
> > supply/stop wrench,
> > know any plumbers?=A0 They use them on the nuts that
> > hold down faucets to sink
> > decks or countertops.=A0 Those are 1" or bigger.
> > I have some needle nose vice-grips but none that open that
> > far, maybe there
> > are some that do.
> > No luck tapping the flat with a screwdriver and hammer
> > either?
> > Moe, Larry the cheese!
> >=20
> > Tom
> >=20
> >=20
> > huh?
> > ;)
> > I'll go to the hardware store and see what I can figure
> > out..
> >=20
> > I don't really wanna bang too much on it, for fear of
> > shattering a 47
> > year old mirror... bad luck, don't ya know ;)
> >=20
> >=20
> > ----
> > Please address private mail -- mail of interest to only one
> > person -- directly to that person.=A0 I.e., send
> > parts/car transactions and negotiations as well as other
> > personal messages only to the intended recipient, not to the
> > Clubhouse public address. This practice will protect your
> > privacy, reduce the total volume of mail and fine tune the
> > content signal to Mopar topic.=A0 Thanks!
> >=20
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.=20
> >=20
> >=20
> >=20
> > =0A=0A=0A      


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.