RE: dash mounted rearview mirror

[62pluckedchicken@xxxxxxxxx]

here's some pics of my frustration...

http://www.timelesstransport.com/dashpad-install/

Rich Kinsley wrote:
> 
> You're good with pictures. Can you send a pic of the area? I was 
> thinking they might have a tool like you use on doors to use for the 
> mirror. I think maybe you could make one from some 1/8" steel? It'd be 
> an interesting challenge. Also if you have that socket maybe you could 
> cut a thin piece from the socket and have it welded to a thin piece of 
> steel. Let's see what it looks like. I always like to make custom tools 
> :-)
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> 
> =====================================================================
> 62pluckedchicken@xxxxxxxxx wrote:
> > 
> > anyone here ever removed a dash mounted mirror on a 62 chysler? 
> > 
> > Is there a trick to this? the nut holding the mirror in place is 1-3/8 
> > inch, making a wrench almost impossible to find that will fit in that 
> > space (through the hole for heater controls)
> 
> 
> 
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.