Re: Torque Converter Question...Please help

[Layne Grissman <64Polara500@xxxxxxxxx>]

${top_text_ad}
Okay, The Tranny is a 63 727.  Engine is a 413....the 413 is from '63
as well.  Past owner took it from an imperial....

As for the input shaft...no, I believe this is still the
original.....and to make sure, Dodger...how do I tell?  Just to be
100% positive...we did have the Tranny rebuilt...

Layne



On Thu, Jul 30, 2009 at 12:34 PM, Gary Pavlovich<glpavlovich@xxxxxxx> wrote:
>
> Layne,
>
> What engine and year/trans combo - Big Block & 1964 727?
>
> Gary Pavlovich
> ----- Original Message ----- From: "Layne Grissman" <64Polara500@xxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Thursday, July 30, 2009 9:47 AM
> Subject: Torque Converter Question...Please help
>
>
>> I need to know what Aftermarket Torque converter will work with our
>> cars....We had a 12" aftermarket CCP but it literally sat back too far
>> where the bendix drive from the starter wasn't meshing with the ring
>> when being engaged.
>>
>> Please forgive if I sound like an idiot on this, but I am in need of a
>> decent Streetable 2400-2800 Stall torque converter that fits
>> stock...and will engage when the starter is engaged....
>>
>> Help!!
>>
>> Layne
>> '64 Polara 500 (She wants to run sooo badly)
>>
>
>
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and negotiations
> as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar
> topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>

${bottom_text_ad}
----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

This email was sent to: ${recipient}

u/?bUrDWg.${encoded_sub_id}.${EMC}