we made the mistake of using a PST kit on a 65 Plymouth, not great stuff.----- Original Message ----- From: "Gary H." <spigot2039@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx> Sent: Wednesday, May 27, 2009 7:36 PM Subject: RE: How difficult - Front suspension rebuild
If you call / contact Bill Rolik you can ask if he can put together a full kit for your Chrysler and give you a kit price.NAPA is probably rebranded Moog?You can duplicate what Kanter's kit uses plus more, like Hank suggested. If it is rubber or moves (t-bars), replace it. :)Gary H. -----Original Message-----I checked Bill Rolik site for a kit... no C-body kits :( NAPA and RockAuto don't have kits either.. RockAuto ball joints (for both MOOG and SPICER/RAYBESTOS) are about half the cost of NAPA brand ball joints If I can't find a decent kit(so far the only kit I found is from Kanter.com).. what all do I need on my shopping list? 2 upper ball joints 2 lower ball joints (do they come with bushings?) Control arm bushings? what else ???----Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!'62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html.