Re: Carter AFB rebuild?

[Don Dulmage <big-d@xxxxxxxxxxxx>]

I have  been retired for over 10 years but i got 200 at least for a 4 bbl. 
Cleaner is toxic and hard on you. It is also expensive. Time depending on 
how much you need to do to get it to a presentable finish 2.5 to 4 hours 
would be normal. I used to do 2 to 4 4barrels per week for a marine engine 
shop nearby. Even then when he bought all the kits and floats he was only 
too happy to pay me 125 per carb. Probably did 1000 Q jets in my 40 plus 
years. Used to do all the thermoquards . Even had a guy drive from  Florida 
to get his done. AFBS are pretty straight forward and a very reliable carb. 
So I would remember Mr Bradshaw as a great guy how did you all a favour. 
Hope it wasnt the cleaner that contributed to his premature demise.
Don
----- Original Message ----- 
From: "Jim Altemose" <jaltemoose@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, May 22, 2009 11:35 AM
Subject: Re: Carter AFB rebuild?


${top_text_ad}
Thanks Mike.  I'm sure they do a great job but $350 does seem a little
steep.  Gary Bradshaw used to charge $75.  I miss him.

- Jim

On Fri, May 22, 2009 at 11:19 AM,  <mikelj@xxxxxxx> wrote:
> PonyCarbs in my neck of the woods is probably the best, they have done 
> several Holleys for me, and I am going to send my Carter AFB to them soon. 
> But they are mucho expensive, they specialize in show cars:
>
> http://www.ponycarburetors.com/
>
> Mike in New Mexico
>
>
>
>
>
>
> > To: 1962to1965mopars@xxxxxxxxxx
> > From: jaltemoose@xxxxxxxxx
> > Subject: Carter AFB rebuild?
> > Date: Fri, 22 May 2009 10:56:54 -0400
> >
> > Can anyone recommend someone to do a rebuild on a Carter AFB? I
> > already have the rebuild kit. I was planning to do it myself but I
> > took on a second job and free time is slipping away. I'm trying to
> > have the car ready to drive to Carlisle. Thanks
> >
> > - Jim
> > Jim Altemose, Long Island, NY
> > '63 Polara 500 (Max Wedge)
> > '63 Polara 500 (383)
> > '65 Belvedere I (Street Wedge)
> > '71 Bronco
>
> --
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person. I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic. Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.



--
- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco

${bottom_text_ad}
----
Please address private mail -- mail of interest to only one person --  
directly to that person.  I.e., send parts/car transactions and negotiations 
as well as other personal messages only to the intended recipient, not to 
the Clubhouse public address. This practice will protect your privacy, 
reduce the total volume of mail and fine tune the content signal to Mopar 
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.