Re: headlight switch grounded?

[Schuyler Wrobel <sky62@xxxxxxxxxxxxx>]

not sure how much of your wiring was melted? did you check the wires  
to the high-beam switch and the circuit breakers?
located behind and above the driver side kick panel, at least that's  
where they are on my 62. the high-beam switch is part of the circuit  
also.
Schuyler V. Wrobel
  Artist & Illustrator <artbysky.org>

sky62@xxxxxxxxxxxxx



On May 10, 2009, at 6:10 PM, chymar01@xxxxxxxxxxx wrote:

> Hey all,
>
> I'm in the process of fixing the melted wiring in my 64 Polara.
> Does the headlight switch have to be grounded(to the dash I guess)  
> to work properly?
> I've tried several switches and I have no dash, interior or brake  
> lights. This is with the switch plugged into the harness but not  
> mounted to the dash.
>
> Mark
>
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person  
> -- directly to that person.  I.e., send parts/car transactions and  
> negotiations as well as other personal messages only to the  
> intended recipient, not to the Clubhouse public address. This  
> practice will protect your privacy, reduce the total volume of mail  
> and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.