RE: leak found
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: leak found



As has been noted here before, remember to "flatten" out the flange on 
the transmission pan when you have it off.  Especially around the bolt 
holes.  Which can be deformed from overtightening.

Paul L.
'63 Sport Fury
440/727
http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html

cathrich wrote:
> 
> 
> good point herb. i've replaced the preasure seal & that area always 
> appears dry though. will have a closer inspection next time i get car 
> out. i thought the pan seal might be reacting to heat where it warms up 
> to form a good seal but when it cools it shrinks just enough to leak. 
> will be replacing pan gasket this winter regardless as i want to adjust 
> the bands & change fluid. richard [oz]
> [Non-text portions of this message have been removed]
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.