Re: Speedo Pinions

[Bill <Y1TopBanana73@xxxxxxxxx>]

${top_text_ad}
I need a couple of them as I "transition" to my final setup. I'm
currently running 215/70/14's w/ 3.23's so I need a 20 tooth right
now, but will eventually need a 19 and then 21.

I'll have to give brewers a call.

On Mon, May 4, 2009 at 3:34 PM, Jeff Adams <ledman_70@xxxxxxxxxxx> wrote:
>
> When I went to 3:91 gears in the Polara I got a used pinion from Brewers
> Performance. They had both used and new. I think I paid $10 for it. What
> gear ratio are you looking for?
> spigot2039@xxxxxxxxxxx wrote:
>>
>> Good points Dodger. I earlier posted with a suggestion to try and ask
>> here first, to see what parts members had available; but I did not
>> finish my thought that there was no correlation to price in that
>> suggestion. Just availability probability.
>>
>> I tend to price stuff less that I let go of to mail list members, but
>> that is my choice, not a given.
>>
>> Thanks,
>> Gary H.
>>
>>
>> -----Original Message-----
>> >From: Dodger
>> >
>> >That does not sound like an unreasonable price to me,,,,,,,,,,,any item
>> >
>> >that is not manufactured any more, so as you may have to drive 100s of
>> >miles,
>> >climb under a car in a junk  yard, and may or may not find what you want
>> >is
>> > not cheap either, and to get a speeding ticket because your speedometer
>> >does not  work is just as  expensive           MTCW
>> >
>> >
>> >In a message dated 5/4/2009 12:07:49 P.M. Central Daylight Time,
>> >Y1TopBanana73@xxxxxxxxx writes:
>> >
>> >Where's  a reasonably priced place to buy speedo pinions for 65 and
>> >back? I just  can't justify paying $65-$120 each for them from  T-flite
>> >Pattys
>> >
>> >Thanks
>> >
>> >--
>> >Bill M
>> >65 Coronet 500  'vert
>> >http://1962to1965mopar.ornocar.com/mmo62008.html
>
>
>
> Jeff Adams
> 64 Polara
>
>
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>



-- 
Bill M
65 Coronet 500 'vert
http://1962to1965mopar.ornocar.com/mmo62008.html

${bottom_text_ad}
----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

This email was sent to: ${recipient}

u/?bUrDWg.${encoded_sub_id}.${EMC}