RE: Removing the steering wheel

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

My stepson says you probably need to use an impact wrench or try tapping 
the bolthead with a hammer as you try to loosen it.
Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies

=====================================================================
62pluckedchicken@xxxxxxxxx wrote:
> 
> Do I have the puller installed correctly?
> 
> http://www.frappr.com/?a=viewphoto&id=5591207&pid=10973704
> 
> I can't get the wheel to budge.. and yes I did remove the center nut ;)
> 
> I suspect I've done something wrong cause the horn ground wire was 
> "squeezed" off in the process



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.