RE: Oil leaking from exhaust bolt

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

FYI: The TTI's use small headed cap screws. I think that's the right 
terminology. Anyway there isn't any room under the header tubes for a 
stud and nut.
Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies

=====================================================================
sky62 wrote:
> 
> did you see any oil in the coolant that you drained out?
> just trying to be optimistic here,
> I'm thinking maybe the header bolt or stud was leaking a
> little coolant and mixing with dirt and oil on the outside of the  
> engine?
> in which case, just put some thread sealer on it and reinstall.
> 
> all the lower exhaust bolts are actually studs (in stock form) that  
> screw down into the
> water jackets. not sure what type of fasteners TTI gives you for the  
> lower ones?
> 
> plus you'll still have some coolant in the block so have a pan handy.
> 
> Schuyler
> 62 Dodge Dart 440 wagon w/ Poly 318
>   <http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>
> FYI - I Do the Decal designs for the Poly head 318 and more! email me  
> with your needs -
>   <sky62@xxxxxxxxxxxxx>
> 
> 
> 
> On Apr 22, 2009, at 10:17 AM, Brian Safford wrote:
> 
> >
> >
> > I can't imagine it is a good thing if I'm seeing oil leaking from  
> > the lower
> > header bolt on the #7 cylinder of my poly 318 ( or any engine for that
> > matter :-( )
> >
> > I've drained the oil and coolant now and am in the process of  
> > removing the
> > TTI headers ( what a PITA on this car - a few of the bolts are  
> > *really* hard
> > to get at )
> >
> > Seems that oil showing up in the water jacket can be either blown head
> > gasket or cracked head ... anything else come to mind?
> >
> > Regards,
> > Brian Safford
> > '62 Dart 440 4-door / poly 318
> >
> > --
> > [Non-text portions of this message have been removed]
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person  
> > -- directly to that person.  I.e., send parts/car transactions and  
> > negotiations as well as other personal messages only to the  
> > intended recipient, not to the Clubhouse public address. This  
> > practice will protect your privacy, reduce the total volume of mail  
> > and fine tune the content signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> >
> > --001636c5c1d6d4ec37046827f002--
> 



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.