Re: Thread chasing
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Thread chasing




Always. Put some grease on the tap so it catches the debris and it does not fall back into the motor. DONT FORCE THE TAP. Tight is tight, too tight is broke.

Thanks
Donnie
----- Original Message ----- From: "Brian Safford" <hzf9vv@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Saturday, July 25, 2009 11:43 AM
Subject: Thread chasing


Any reason NOT to chase the intake manifold threads ( or any others
for that matter ) before I reinstall? I'm resealing the intake, timing
cover and water pump.

Thanks,
Brian


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.