Dennis,I agree, the car needs to be driven more. Only drove it 1/2 mile down the street and turned around, 4 times as we were playing with the adjustment. Fairly bumpy road. She came up an 1/2" on the trip to the muffler shop Been thinking about cutting some wood dowell pins as measuring tools and try the book way again. Got finished at the muffler shop today and she will be coming home tomorrow.
MS Crusier may be happier at home and act right!! Ollie----- Original Message ----- From: "Dennis C." <dennis.2914@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx> Sent: Wednesday, July 22, 2009 12:47 PM Subject: RE: Suspension Height
Ollie, You may not like the procedure however Mother Mopar's way is probably the best way to go setting ride height. The purpose of Mother Mopar's way is to set the tension on each torsion bar the same. Nothing wrong with measuring from other locations however body panels are not all exactly the same and typically need to be shimmed to fit. You have the new suspension parts working against you at the moment. These new parts add friction to the car movement of the car up and down. Nothing wrong with a short ride over some moderate bumps to help free things up. It is also necessary to bounce the car a number of times between adjustments. You may find that once you have it alighned and put some miles on it you may want to go back and check ride height again. Sounds like you are doing great - keep up the good work. Dennis C. Ollie wrote:Left the shop last night and MS Cruiser was sitting at 25 3/4 " fender height. This morning when we measured it was 24 3/4" without moving the vehicle. ??? Ollie [Non-text portions of this message have been removed]1996 Dodge Ram 3500 Van Conversion 1964 Plymouth Belvedere 318 Auto 1963 Plymouth Sport Fury 383 4-speed 1949 Dodge Pickup 289/C4 soon to be changed 1998 Honda Valkyrie Standard ----Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!'62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html.