FWIW, I just placed an order for a pair of .920 torsion bars through Marsh Performance. They are still $188.00, but the price of the seals and locks have more than doubled. I will re-use my old ones. Todd Marsh seems to be a good guy and was very appreciative when I told him that he was recommended on this site. '65 Coronet 500 stroker -----Original Message----- From: moparbikeguy@xxxxxxx To: 1962to1965mopars@xxxxxxxxxx Sent: Fri, Jul 17, 2009 7:14 am Subject: sway bars I just finished changing my '65 Coronet over to power steering and it is a lot more pleasurable to drive now. Next, I am thinking about installing a front sway bar setup. Any suggestions as to getting the biggest bang for the buck? '65 Coronet 500 stroker [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.