Re: dual master cylinder for 64 B body.... where to get?....tips & hints

[Ollie <satellite1965@xxxxxxxxxxx>]

I beleive any 67 on up will work. Put one for a 67 Satellite in my 65 
Satellite B Body and used my rod and it  fit. O'Reilly Part# MC71258 $35.99 
no core
Ollie
----- Original Message ----- 
From: "Doug Daniel" <dougdaniel50@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, July 08, 2009 8:54 PM
Subject: RE: dual master cylinder for 64 B body.... where to get?....tips & 
hints



look at napa for a aspen or volaire 78 79 i believe

--- On Wed, 7/8/09, george smith <bt6t4@xxxxxxxxx> wrote:

> From: george smith <bt6t4@xxxxxxxxx>
> Subject: RE: dual master cylinder for 64 B body.... where to get?....tips 
> & hints
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Wednesday, July 8, 2009, 9:18 PM
>
> I went with a master from a 71-72 E Body over the counter
> part.
> George
>
>
> --- On Wed, 7/8/09, Rich Kinsley <rlkinsley@xxxxxxxxx>
> wrote:
>
> > From: Rich Kinsley <rlkinsley@xxxxxxxxx>
> > Subject: RE: dual master cylinder for 64 B body....
> where to get?....tips & hints
> > To: 1962to1965mopars@xxxxxxxxxx
> > Date: Wednesday, July 8, 2009, 2:04 PM
> >
> > I am sure you can use (and even must use probably)
> your old
> > rod. I had
> > to use mine. I think you can use a wide variety of
> M/C's. I
> > thnk the
> > Volare and Diplomat were a couple preffered ones.
> > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> >
> =====================================================================
> > W.A. Edison wrote:
> > >
> > > I'm converting from drum to disc brakes on the
> front
> > of my 64 Plymouth
> > > Sport Fury, using parts from a 73 Dodge Dart.
> I've got
> > all the bits and
> > > pieces, including a proportioning valve, but I
> need a
> > dual master
> > > cylinder. I can't seem to find an online vendor
> who
> > sells one
> > > specifically for my car. I ordered one from
> > PartsTrain, but they later
> > > cancelled the order. I see some companies on the
> 62-65
> > vendors page that
> > > sell other stuff associated with the m/c like
> adapters
> > and bushings, not
> > > what I'm looking for. Will other years m/cs fit
> my
> > car?
> > >
> > > Also, I should be able to use the push rod out of
> my
> > old single master
> > > cylinder in my new setup, correct? Or will a new
> > master cylinder come
> > > with a push rod I can use? I have manual brakes
> now
> > and am staying with
> > > them.
> > >
> > > Thanks in advance for your help.
> > >
> > > /Butch /Ferndale, WA
> > >
> >
> >
> >
> > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> >
> >
> > ----
> > Please address private mail -- mail of interest to
> only one
> > person -- directly to that person. I.e., send
> > parts/car transactions and negotiations as well as
> other
> > personal messages only to the intended recipient, not
> to the
> > Clubhouse public address. This practice will protect
> your
> > privacy, reduce the total volume of mail and fine tune
> the
> > content signal to Mopar topic. Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> >


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.