RE: carb sealer
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: carb sealer



Possibly.  It is a fresh rebuild, and the bubbles so tiny, I was hoping 
to get away without taking it apart.

Thanks, Gary



spigot2039@xxxxxxxxxxx wrote:
> 
> Can you double up the gasket?
> 
> Gary H.
> 
> -----Original Message-----
> >From: SB  
> >My Carter BBD I just rebuilt has a slight warp, and gas slightly bubbles 
> >where the top meets the body in the front.  Is there a sealer I could 
> >smear there to stop this?


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.