Re: Windshield Rubber

[Ollie <satellite1965@xxxxxxxxxxx>]

Had good luck with Steele Rubber. Fit great. For a 65.
Ollie
----- Original Message ----- 
From: "Joey" <jake4@xxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Sunday, July 05, 2009 4:08 PM
Subject: Re: Windshield Rubber



I purchased mine from year one, it fit pretty good.
Joey
----- Original Message ----- 
From: "Gary H." <spigot2039@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Sunday, July 05, 2009 2:49 PM
Subject: Re: Windshield Rubber


> You can talk to Joe Suchy at Carlisle (he usually has a vendor space 
> there) or call him. He is listed on the swap meet page.
>
> Thanks,
> Gary H.
>
> -----Original Message-----
> > From: Don Owen <d4owe9@xxxxxxxxxxx>
> > Sent: Jul 5, 2009 1:46 PM
> > To: Mopar Discussion Group <1962to1965mopars@xxxxxxxxxx>
> > Subject: Windshield Rubber
> >
> >
> >
> > Fellas:
> > WHo has the most correct windshield rubber for 64 Plymouth?
> > The product I have is from Kramer, made in Thailand. and does not seal 
> > snugly
> > at the lower corners along the cowl. THe same brand worked great for the 
> > rear window.
> > Any suggestions of other sources who may be at Carlisle next weekend?
> > Thanks...hope to see some of you guys on Sat morning. or come se us at 
> > Flea MArket space
> > L14. Donny, 64 Belvedere.
> > _________________________________________________________________
> > Insert movie times and more without leaving Hotmail®.
> > http://windowslive.com/Tutorial/Hotmail/QuickAdd?ocid=TXT_TAGLM_WL_HM_Tutorial_QuickAdd_062009
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person --  
> > directly to that person.  I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will protect 
> > your privacy, reduce the total volume of mail and fine tune the content 
> > signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person --  
directly to that person.  I.e., send parts/car transactions and negotiations 
as well as other personal messages only to the intended recipient, not to 
the Clubhouse public address. This practice will protect your privacy, 
reduce the total volume of mail and fine tune the content signal to Mopar 
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER