
SV: SV: 361BB
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
SV: SV: 361BB
- From: Knud-Erik Holm <kebh@xxxxx>
- Date: Wed, 24 Jun 2009 20:35:46 +0200
Thats it, thats the one in both links
Thanks,
It will be shelved again.
Knud erik
-----Oprindelig meddelelse-----
Fra: Gary H. [mailto:spigot2039@xxxxxxxxxxx]
Sendt: 24. juni 2009 19:54
Til: 1962to1965mopars@xxxxxxxxxx
Emne: Re: SV: 361BB
Ah. That's the important information! Should be the same as a Chrysler
marine engine.
http://www.oldmarineengine.com/discus/messages/2/11350.jpg
The military item:
http://www.nationalmuseum.af.mil/factsheets/factsheet.asp?fsID=964
Maybe you should consider using the block and "re-filling" it with
automotive components; or sell it to a boat/military collector and get a car
motor to start with.
Thanks,
Gary H.
-----Original Message-----
>That´s the thing no timing chain,...I forgot to tell you that it is a
military Chrysler engine from a armoured
>carrier.
>
>Best, Knud-erik
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
This email was sent to: arc.6265@xxxxxxxxxxxxxx
u/?bUrDWg.bSONJP.YXJjLjYy
?p=TEXFOOTER
Back to the Home of the Forward Look Network