Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies The combo I tried yesterday wouldn't hardly let me get out of the garage. Today I did a rod change and swapped the coil. Would barely run till it started to get warmed up but remember I don't have any choke mechanisms. After it warmed up it started running quite good. It was blazing hot here today and my cooling issues seem to be gone. The new radiator works great! It only ran barely mid-range in 100deg weather here. If you're watching the college world series you know how hot it got here in Omaha the last couple days. I got a deal on the Accel Super coil #1840 from my NAPA store. They sold it to me for $31 including the $5 shipping cost since it wasn't in stock. Got it overnight too. The other stores wanted $50 but they had them on the shelf. Doing so many changes at the same time can help hide the true culprit behind problems. I prefer to make one change at a time but that's not always convenient. I still have that nagging miss at the top end of the rpm range. Probably I'll check out the ECM next. It's the NAPA one that I abused with a bad wiring system. Any local guys got one I can borrow? (Mopar elect type) ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.