Re: Engine Mounts - RB Engine in Polara
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Engine Mounts - RB Engine in Polara




Layne, that is correct. I recently bought some brackets from Schumacker for my Dodge 440 with big block. I felt just like you--this can't be correct- but it is. Tranny mounts lined right up as well as the engine mounts. Since then I have seen pics showing the same -- must be a clearance issue somewhere...........................MO......sw iowa ----- Original Message ----- From: "Layne Grissman" <64Polara500@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, March 18, 2009 3:24 PM
Subject: Engine Mounts - RB Engine in Polara


Does anyone happen to have pictures of how the engine mounts look with
the engine mounted to them?

The only reason I am asking is on the driver side, the mount is only
half used...

The engine looks correct in the car when fully let down, It just
strikes me as weird that one engine mount(Passenger side) is full
utilized and the driver's side is only half utilized....

That's the reason I am asking for pictures...for comparison sake..

If you want to contact me, use 64polara500@xxxxxxxxx

Thanks in advance,
Layne
64 Polara 500



----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.