RE: Oil Pan
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Oil Pan



It seems to me I have heard of that before.
Rich Kinsley

=====================================================================
Steve Mick wrote:
> 
> I bought an oil pan new from an e-pay store.  It was supposed to fit the 
> B 
> body big blocks. Mine is a 1964 Dodge 440 that I am putting a 413 into. 
> . It 
> seems to be well constructed and fit the engine ( altho I haven't got 
> the 
> oil pick-up yet.) It clears all the steering  linkage even when turning 
> lock 
> to lock The problem I did have was right front lower corner of the sump. 
> I 
> had to notch the bottom flange of the K member where it interfered. No 
> problem.. If the sump was toward the back  about an inch I wouldn't have 
> had 
> to do that.....................MO...........sw   iowa
> ----- Original Message ----- 
> From: "Bob Kinker" <maxwedge11@xxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Sunday, March 15, 2009 5:42 PM
> Subject: Re: Oil Pan
> 
> 
> 
> Try this site http://www.autohobbydigest.com/pans.html The 402 pan fits 
> later B bodies, like GTX Charger etc.
> 
> 
> 
> ----- Original Message ----
> From: Kevin Merkley <krmerkley@xxxxxxxxx>
> To: 1962to1965mopars@xxxxxxxxxx
> Sent: Sunday, March 15, 2009 6:30:50 PM
> Subject: Oil Pan
> 
> 
> Hi I have a question about oil pans.
> 
> I know that the oil pans that fit the 62-65 B bodies are very shallow
> and center sump.
> 
> I have a pan off a 383 that I hope to use in my wife's 64 Polara 500
> convert. It has the numbers 402 stamped on it.
> 
> Will that work? I also know that there was a message or web site that
> showed the dimensions of what will work but I cannot seem to find it
> again.
> 
> Can someone help?
> 
> Thanks.
> 
> K.
> 
> Kevin R. Merkley
> Thunder Bay, Ontario
> 64 Dodge 440 2dr HT (Cdn)
> 64 Dodge Polara 500 Convertible (Cdn)
> 
> 
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person. I.e., send parts/car transactions and 
> negotiations 
> as well as other personal messages only to the intended recipient, not 
> to 
> the Clubhouse public address. This practice will protect your privacy, 
> reduce the total volume of mail and fine tune the content signal to 
> Mopar 
> topic. Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
> 
> 
> 
> 



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.