Re: Oil Pan

["MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>]

I bought an oil pan new from an e-pay store.  It was supposed to fit the B 
body big blocks. Mine is a 1964 Dodge 440 that I am putting a 413 into. . It 
seems to be well constructed and fit the engine ( altho I haven't got the 
oil pick-up yet.) It clears all the steering  linkage even when turning lock 
to lock The problem I did have was right front lower corner of the sump. I 
had to notch the bottom flange of the K member where it interfered. No 
problem.. If the sump was toward the back  about an inch I wouldn't have had 
to do that.....................MO...........sw   iowa
----- Original Message ----- 
From: "Bob Kinker" <maxwedge11@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Sunday, March 15, 2009 5:42 PM
Subject: Re: Oil Pan



Try this site http://www.autohobbydigest.com/pans.html The 402 pan fits 
later B bodies, like GTX Charger etc.



----- Original Message ----
From: Kevin Merkley <krmerkley@xxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Sunday, March 15, 2009 6:30:50 PM
Subject: Oil Pan


Hi I have a question about oil pans.

I know that the oil pans that fit the 62-65 B bodies are very shallow
and center sump.

I have a pan off a 383 that I hope to use in my wife's 64 Polara 500
convert. It has the numbers 402 stamped on it.

Will that work? I also know that there was a message or web site that
showed the dimensions of what will work but I cannot seem to find it
again.

Can someone help?

Thanks.

K.

Kevin R. Merkley
Thunder Bay, Ontario
64 Dodge 440 2dr HT (Cdn)
64 Dodge Polara 500 Convertible (Cdn)


----
Please address private mail -- mail of interest to only one person --  
directly to that person. I.e., send parts/car transactions and negotiations 
as well as other personal messages only to the intended recipient, not to 
the Clubhouse public address. This practice will protect your privacy, 
reduce the total volume of mail and fine tune the content signal to Mopar 
topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.