reinstalling torsion bars

["J. O." <JJO1967@xxxxxxxxxxx>]

any hints about what position to have the lower control arm in when plugging the torsion bar into it? I would assume as low as possible so that the bar is preloaded when connecting the ball joints and spindle.
I failed to note the unloaded position at disassembly.

thanks!

Jim O.
'64

_________________________________________________________________
Hotmail® is up to 70% faster. Now good news travels really fast. 
http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_HM_70faster_032009
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER