RE: Wiring harness wrap

[Tom Duross <tduross1@xxxxxxxxxxx>]

I did the same in my work truck when I installed wig-wags front and rear.
I got plastic looms from Rock Auto and used cable ties but they had
attachment clips with screws.
Keeps everything orderly.
You might check Evan's website to see what he uses for stock appearances.
Tom

=====================================================================
I'm doing my wiring harness too. I really don't care about original so I
got some split corrugated plasticwire protector from Home Depot. It's
really cheap and looks, works good. Mine is black.
Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
=====================================================================
=Mike Phelps wrote:
>
> Any suggestions on what to use to wrap my wiring harness with? It
> doesn't have to be OEM but I'd like it to look correct. Also is the
> whole harness wrapped, even what is not seen? I guess it should be to
> protect the wiring, huh?
>
> Mike Phelps


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.