RE: Plug Gap
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Plug Gap



I had done that to mine but went back to the .035". I was having lot's 
of ignition issues and that may have been OK but I was advised it'd be 
better at .035". I guess less likely for missfire. Mine is 318poly & 
Mopar electronic.
Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
=====================================================================
Bill Maurits wrote:
> 
> I currently have a Pertronix electronic ignition conversion and one of
> their HO coils on my 318 Poly. Any thoughts on whether I could or
> should bump up the plug gap from .035" to .040"?
> 
> Bill M
> 65 Coronet 500 'vert



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.