RE: Slightly off-topic shifter/console question...

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

My friend in his '68 'Cuda did alot of wood work to his console and 
added a B&M shifter. I don't think it's this particular shifter but I 
believe the differences are mostly aesthetic. I'd think it should be 
doable.
Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies 
=====================================================================
Robert (UK) wrote:
> 
> Hi all
> Please excuse the slightly off-topic question, but I was hoping someone 
> out there in 62-65 land may have some experience with late-60's 
> consoles...
> My brother & i are looking at fitting an aftermarket shifter into a 
> standard console in our 69 Sport Satellite. We were going to just 
> replace the tired old B&M Z-gate shifter with a better aftermarket 
> shifter but then we fancied the idea of adding a console (it has bucket 
> seats so presume it should have had a console from day-one). We've 
> gathered a few of the console parts but have no original-style shifter 
> parts so think it may be as well to try & use an aftermarket shifter.
> Because of the relatively low height of the console where the shifter 
> pokes thru, we need to look for a shifter that is fairly low-profile.
> This B&M shifter looks like it might do the job, but without the plastic 
> 
> base: http://www.bmracing.com/s.nl/it.A/id.112/.f (I've found I need to 
> click my browser's refresh button to get this to display properly).
> 
> Have any of you guys ever tried this sort of thing in a 69-ish b-body? A 
> 
> friend over here is doing a similar job with a Hurst shifter in his 70 
> Challenger, but we'd like to hear from anyone who knows whether this 
> will work in our particular application.
> 
> Shifter instructions pdf here 
> http://www.bmracing.com/bmracing/installation_instruction/11.pdf 
> suggests it might work, with the B&M 'cladding' removed, but it's hard 
> to tell whether the height would be ok. We could raise the shifter up if 
> 
> needed but would struggle to make it fit if it needed lowering in 
> relation to the console (dont want to have to raise the console up!)
> 
> Sorry for the long off topic question but we'd really appreciate some 
> help before we spend $200+ on a shifter that might not fit!
> 
> Many thanks in advance...
> 
> Robert
> 63 Polara 500
> England



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.