Small hose, Exactly what I did, was hoping someone made the correct gasket/seal!! It's not bad looking but, the one were looking for has a U shaped profile the hose is of course O shaped. I just e-mailed Detroit Muscle a request. I have an original that is in fair to good shape that I could loan them for a template. Will let every one know the outcome. Herb -------Original Message------- From: Dodger7998@xxxxxxx Date: 2/13/2009 6:10:05 PM To: 1962to1965mopars@xxxxxxxxxx Subject: Re: gaskets When I did my 63 dodge wagon up, I could not find the ones for the tail lights for it either, what I ended up doing on them was got some small vacume hose, laid it in an old window channel that was laying around, took a hobby knife, and split the hose open, and slid it on the flange of the tail light when the tail light is bolted down, it keeps it in place, not correct, but did make a good looking installation [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. This email was sent to: arc.6265@xxxxxxxxxxxxxx u/?bUrDWg.bSONJP.YXJjLjYy ?p=TEXFOOTER