Re: RE Pistons?

[Herb <zephyr9900@xxxxxxxxxxx>]

They said 0.060 was OK all day long on all B / RB blocks.  If I figure
correctly about 0.062 + /- is the difference in the 413 & 440 bore.  Should
be no problem??  I have bored B / RB blocks out 0.063 and more for clearance
with NO problems.  Maybe I was just real lucky but the article seems to back
me up.  Just my II.

Herb
-------Original Message-------
 
From: Gary H.
Date: 2/2/2009 4:25:27 PM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: RE Pistons?
 
Good read, thanks. I don't see anything there that contradicts the argument
not to exceed a 0.040" bore on a 413 to get to 440, though.
 
Gary H.
 
-----Original Message-----
>From: Herb
>
>Just something to read!!
>
>http://www.440source.com/blockinfo.htm
>
>Herb
>
>-------Original Message-------
>
 
>From: Gary H.
>
>Date: 2/2/2009 3:33:15 PM
>
>To: 1962to1965mopars@xxxxxxxxxx
>
>Subject: Re: RE Pistons?
>
>
>
>Seems I read that boring to 0.020" is good, but not to exceed a 0.040" bore

>413 to 440 would exceed that bore model, yup.
>
>
>
>Gary H.
>
>
>
>-----Original Message-----
>
>
>
>  >I can't
>
>>bore a 413 to a 440 piston.  I can go to 426, but cylinder walls would be
>
>>thinner than I would be comfortable with.
 
 
----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!
 
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
 
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER