Re: Tach wiring harness

[David orr <fe2orr@xxxxxxxxxxxxxx>]

As I recall we had a post several years ago and the diagram should be on our 
web page.  I have the diagram and will look for it.  The wires are in the 
console loop.  Dave O
----- Original Message ----- 
From: "Gary H." <spigot2039@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Monday, January 26, 2009 9:05 AM
Subject: Re: Tach wiring harness


> I think there was a discussion here about a '63 Polara 500 that suggested 
> there was a tach wire for the tach in the console wire loop. I could be 
> recalling incorrectly, but the wiring diagram in the FSM should give a 
> clue about that and where the sending unit attaches, etc.
>
> Gary H.
>
> -----Original Message-----
>
> > I recently got a console tach for my '64 Polara 500 & assumed there would 
> > be a wiring harness in the consol for it but nothing extra there.  Does 
> > anyone know if there is such a thing available and also where does the 
> > sending unit attach?  Thanks
> > Mike in New Mexico
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.