Re: 1/4 window jamb seal

[musclecarguy1@xxxxxxxxx]

You don't want to be bending anything stainless. It must fit in the stainless channel with out chenging the shape of that stainless piece. Are you speaking of the piece that is on the end of the quarter glass and it meets up with the front door glass at the back to seal the two windows? Is it a vertical piece? If it is, this is sometimes called, the "Front Vertical Quarter Glass Seal (which seals qtr glass to front door glass). If you are talking in the door jamb itself (which you mention jamb in your question) then it's a totally different piece you need from what I am thinking.    Lyle


--- On Sun, 1/18/09, Jimmy Peavy <peaver63@xxxxxxxxxxxxxx> wrote:

> From: Jimmy Peavy <peaver63@xxxxxxxxxxxxxx>
> Subject: Re: 1/4 window jamb seal
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Sunday, January 18, 2009, 7:08 AM
> Now I'm not sure what piece you are talking about.
> 
>  Jimmy
> 
> Don Gallimore wrote:
> 
> > 
> > My question is what is the secret to putting them on? 
> Bending the stainless at the top scares me - that's
> pretty hard stuff and might deform if I can bend it. 
> Anybody replaced these?
> > 
> >    Akron Don
> > 
> > Joey wrote:
> > 
> >>> What is the correct name for the rubber seal
> that goes in the door jamb
> >>> where the rear window of a hardtop meets the
> door,,,,,,any thoughts on who
> >>> carries them,,,,R/T maybe
> >>>     
> >> 
> > 
> > 
> > ----
> > Please address private mail -- mail of interest to
> only one person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> > 
> > '62 to '65 Mopar Clubhouse Discussion
> Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> > 
> > 
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send parts/car
> transactions and negotiations as well as other personal
> messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


      


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.