Cameron, If you can't find a tool, Just use a small dull chisel or a screw driver and tap lightly counter clockwise with a hammer on one of the tabs that are sticking up. It will or should come off fairly easily unless some gorilla installed it. (-; When reinstalling it make sure you have all three tabs aligned in their grove and ultimately locked in to avoid leeks. Again use the same tool to reinstall the ring tapping it clockwise. Now for the disclaimer, I don't recommend using a tool (screwdriver) in a way that it is not intended to be used for safety reasons, But! Herb -------Original Message------- From: Cameron Hubling Date: 1/10/2009 1:04:24 PM To: 1962to1965mopars@xxxxxxxxxx Subject: Fuel sending unit tool Does anyone have a fuel sending unit tool for sale? Cameron 65 Valiant Signet [Non-text portions of this message have been removed] ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html. This email was sent to: arc.6265@xxxxxxxxxxxxxx u/?bUrDWg.bSONJP.YXJjLjYy ?p=TEXFOOTER