RE: A couple questions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: A couple questions




Paul Lennemann wrote:
> 
> I got a call from the body guy the other night.  He broke a linkage rod 
> on the drivers side door latch.  It hadn't been working right so this 
> was probably a pre-existing condition.  Anyway it's the rod that goes 
> from the lock cylinder to the latch assy. and is @ 3" long.  I've 
> checked a few places with no luck.  Can anyone direct me to a supplier 
> where I might find one?
> The second thing is the back glass.  He would like to take it out and I 
> have already ordered a new gasket since the old one is rock hard.  But 
> what about the glass.  I would think it would be easier to find than a 
> windshield (which was not easy & expensive).  Just in case he would 
> happen to break it, does anyone have an extra?
> 
> Paul L.
> '63 Sport Fury
> 440/727
--------------------------------------------------------------------

A few years ago I had to fix my door mechanism and i found some mopars 
that had the same stuff at the U-Pull-it ( I think). I took extra stuff 
for the future and MAYBE I have one of those rods. I'll try to look thru 
my stuff to see if I can locate it. 



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.