Re[2]: Studebaker wheels?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re[2]: Studebaker wheels?



Exact opposite.  Dodge will fit Ford. Ford will not fit Dodge

*********** REPLY SEPARATOR  ***********

On 1/6/2009 at 7:40 AM dougdaniel50@xxxxxxxxx wrote:

>also  remember  ford rims will fit our dodge years   but dodge will not
>fit fords
>
>
>--- On Tue, 1/6/09, Gary H. <spigot2039@xxxxxxxxxxx> wrote:
>
>> From: Gary H. <spigot2039@xxxxxxxxxxx>
>> Subject: RE: Studebaker wheels?
>> To: 1962to1965mopars@xxxxxxxxxx
>> Date: Tuesday, January 6, 2009, 9:20 AM
>> 15's with early dog dish hub caps is a good tip. Thanks
>> Robert. Here are a couple references
>>
>> http://studebakerdriver.com/c/33743/Wheels_Tires/studebaker/index.html
>>
>> http://www.studebakervendors.com/index.htm
>>
>> The alternative is having later year's Mopar 15 steel
>> wheels modified to use the early '60s style center to
>> hold the dog dish.
>>
>> Gary H.
>>
>> -----Original Message-----
>> ...
>> >I read recently that Studebaker 15" steel wheels
>> have the same stud
>> >pattern (5x 4.5" presumably) as 'our'
>> 62-65 b-bodies so can be used to
>> >mount the early 10" dog dishes. Recommended by Bob
>> Mosher, apparently!
>> >
>> >Anyone on here tried this? What's the alternative
>> if you want 15's with
>> >early hub caps?
>> >
>> >And does anyone know a source for these (and the hub
>> caps), apart from
>> >ebay?
>> >
>> >Thanks in advance
>> >
>> >Robert
>> >63 Polara 500
>> >England
>>
>>
>> ----
>> Please address private mail -- mail of interest to only one
>> person -- directly to that person.  I.e., send parts/car
>> transactions and negotiations as well as other personal
>> messages only to the intended recipient, not to the
>> Clubhouse public address. This practice will protect your
>> privacy, reduce the total volume of mail and fine tune the
>> content signal to Mopar topic.  Thanks!
>>
>> '62 to '65 Mopar Clubhouse Discussion Guidelines:
>> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>
>
>
>----
>Please address private mail -- mail of interest to only one person --
>directly to that person.  I.e., send parts/car transactions and
>negotiations as well as other personal messages only to the intended
>recipient, not to the Clubhouse public address. This practice will protect
>your privacy, reduce the total volume of mail and fine tune the content
>signal to Mopar topic.  Thanks!
>
>'62 to '65 Mopar Clubhouse Discussion Guidelines:
>http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 
















Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.