New Timing Chain Issue
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

New Timing Chain Issue



I bought an HD timing chain for my Coronet, but the upper sprocket is
very tight on the cam and the bottom sprocket won't go over the
step-up on the crank more than ~1/4". I have de-burred the edge of the
hole just in case but it didn't help much. Any ideas? Is the sprocket
machined wrong?

Bill M


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.